6/17/2023 0 Comments Blue battery operated lights![]() Browse to your Home Assistant instance.Options for Shelly can be set via the user interface, by taking the following steps: Active or passive listening can be enabled in the options flow. Shelly generation 2 devices running firmware 0.12 or later can act as a Bluetooth proxy for advertisements. Integration is communicating directly with the device cloud connection is not needed. Ws:// + Home_Assistant_local_ip_address:Port + /api/shelly/ws (for example: ws://192.168.1.100:8123/api/shelly/ws), click Apply to save the settings. Battery powered devices need manual outbound websocket configuration, Navigate to the local IP address of your Shelly device, Settings > Connectivity > Outbound websocket and check the box Enable Outbound Websocket, under server enter the following address: Generation 2 devices use the RPC protocol to communicate with the integration. Shelly device configuration (generation 2) After changing the CoIoT peer, the Shelly device needs to be manually restarted. This is mandatory for battery operated devices. To enable this, enter the local IP address of the Home Assistant server and port 5683 into the CoIoT peer field and push SAVE button. We recommend using unicast for communication. Navigate to the local IP address of your Shelly device, Internet & Security > ADVANCED - DEVELOPER SETTINGS and check the box Enable CoIoT. For Shelly firmware 1.10.0 or newer, CoIoT must be enabled in the device settings. Generation 1 devices use the CoIoT protocol to communicate with the integration. Shelly device configuration (generation 1) ![]() ![]() There are some differences in how devices should be configured and in the naming of entities and devices between generations. Both generations are supported by this integration. If it wasn’t discovered automatically, don’t worry! You can set up aįollow the instructions on screen to complete the setup. ![]()
0 Comments
Leave a Reply. |